| 513401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:200 mm; da min.:220 mm; Da max.:400 mm; Calculation factor Y2:3; D:420 mm; K:12 mm; B:138 mm; Reference speed:1200 r/min; r1,2 min.:5 mm; Calculation factor Y1:2; Limiting speed:2400 r/min; Basic static load rating C0:2900 kN; Fatigue load limit Pu:224 kN; d2 ≈:249 mm; D1 ≈:351 mm; Mass bearing:91 kg; Basic dynamic load rating C:2439 kN; Calculation factor Y0:2; b:22.3 mm; Calculation factor e:0.33; |
| 527450Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic dynamic load rating C:190 kN; Mass rod end:2.45 kg; d2 max.:104 mm; r1 min.:0.6 mm; Basic static load rating C0:200 kN; l2 max.:217 mm; Material constant KM:330; Specific dynamic load factor K:150 N/mm²; B:32 mm; C1 max.:28 mm; G:M 42x3; α:7 °; l7 min.:50 mm; h:163 mm; l1 min.:92 mm; dk:60 mm; d:45 mm; |
| NTN CRTD6405 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:75 mm; r, r1,2 min.:1 mm; Mass inner ring:0.29 kg; F:85 mm; B:30 mm; |
| 829746 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Static Radial Load Rating Co:85000 N; Basic Dynamic Radial Load Rating C:124000 N; Fillet Radius ra:2.00 mm; D:160.0000 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; d:75.000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; B:68.26 mm; Accessories:Synthetic Rubber Sea; Sealed Speed Rating n3:2800 rpm; |
| NTN CRTD8801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d3:780 mm; B5:102 mm; d1:740 mm; G:Tr 670x6; Mass lock nut:75.5 kg; h:20 mm; b:45 mm; d2:703 mm; Associated eyebolt for handling:M 10; B:80 mm; Associated spanner:TMFN 600-750; |
| 545678 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | F:55 mm; s max.:1 mm; ra max.:0.6 mm; Fatigue load limit Pu:8.15 kN; D:68 mm; Basic static load rating C0:67 kN; Reference speed:7500 r/min; Db:55.8 mm; d:50 mm; da:59.2 mm; r1,2 min.:0.6 mm; Limiting speed:8500 r/min; Da:60.8 mm; Basic dynamic load rating C:27 kN; E:60 mm; Mass bearing:0.23 kg; db:54.5 mm; B:20 mm; |
| 546680Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | h1:94 mm; α:7 °; r1 min.:0.6 mm; l4 max.:128 mm; Material constant KM:330; l7 min.:30 mm; dk:35.5 mm; w:30 mm; l5 ≈:18 mm; Basic static load rating C0:90 kN; B:20 mm; d4 ≈:35 mm; G:M 24x2; d:25 mm; l3 min.:36 mm; Mass rod end:0.65 kg; C1 max.:18 mm; Basic dynamic load rating C:48 kN; Specific dynamic load factor K:100 N/mm²; d2 max.:65 mm; |
| NSK 260TFD3602 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass pillow block:5.17 kg; H1:57.15 mm; P90°:12.5 kN; da:36.513 mm; Max. speed for contact seal:4000 r/min; P60°:20.9 kN; H2:20.637 mm; Cap bolt:2 x 7/16-14 UNC; PG:1/8 NPT; R1:28.575 mm; H:112.713 mm; N1:15.875 mm; Pa:2.54 kN; Housing:SAF 509; A2:88.9 mm; S:4.763 mm; Contact seal:2 x B9784-12; Stabilizing ring:SR-9-0; Initial grease fill:51.03 g; Ca:28.804 mm; |
| 524902 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r2 max.:0.8 mm; Mass needle roller:0.16 g; r1 max.:0.6 mm; Dw:2 mm; r1,2 min.:0.2 mm; Lw:6.3 mm; |
| FAG 524902 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Fatigue load limit Pu:204 kN; D:1400 mm; d:1180 mm; Mass bearing (including seat washer where applicable):495 kg; H:175 mm; Reference speed:200 r/min; Minimum load factor A:2100; Da max.:1270 mm; r1,2 min.:6 mm; d1 ≈:1392 mm; Basic dynamic load rating C:1780 kN; Limiting speed:280 r/min; Basic static load rating C0:20000 kN; D1 ≈:1188 mm; ra max.:5 mm; da min.:1310 mm; |